FONTERRA WAITOA - WAIKATO POWDER "D" ROOF
PROJECT: Vulkem Crack Repairs – Polyurea 2.0mm Membrane
PROJECT SPECIFICATION: Tremco Vulkem 350R, Polyurea at 2 litres/m² (nominal 2.0mm thickness) over the entire roof area
CONTRACT APPLICATOR: Polymer Group Ltd, Contracting Division
This project was undertaken and completed by Polymer Group Ltd
Contact Ron Avery on mob 021 956 211, or
Email: avery@polymer.co.nz
![](https://www.polymer.co.nz/wp-content/uploads/2019/03/FonterraWaitoaRoof-018-1024x768.jpg)
Project Specification:
Strip the old membrane. Rout out all cracks. Apply the membrane sealant into the cracks. Stripe coat all the cracks with Vulkem 350R and inlay a reinforced bandage.
Apply 2.0mm elastomeric liquid applied polyurethane membrane.
Finish coat with 2.0 mm thickness sprayed polyurea.
REPAIR AND PROTECTION OF MEMBRANE ROOF
![](https://www.polymer.co.nz/wp-content/uploads/2019/03/Waitoa-Roof-020-1024x768.jpg)
![](https://www.polymer.co.nz/wp-content/uploads/2019/03/Waitoa-Roof-II-015-1024x768.jpg)
![](https://www.polymer.co.nz/wp-content/uploads/2019/03/Waitoa-Roof-II-035-1024x768.jpg)
![](https://www.polymer.co.nz/wp-content/uploads/2019/03/Waitoa-Roof-022-1024x768.jpg)