Fast Cure Floor Coatings

Cryl-A-Floor

Cryl-a-Flex flooring systems are fast curing, recoatable, UV stable Methyl Methacrylate flooring systems with excellent chemical resistance. Cryl-a-Flex flooring systems can be applied over a wide temperature range and is available in a variety of anti-slip texture finishes. It is typically specified with a slip resistant finish.

  • Thickness: 1/8 – 3/16 inch
  • 1 hour curing minimizes downtime
  • Installs at temperatures as low as -25°C
  • UV resistant for indoor and outdoor use
  • Meets ADA, USDA, FDA, OSHA and CFIA requirements, NSF certified
  • VOC compliant
  • Contributes to LEED

Use: Laboratories, Traffic aisles, Heavy industry, Loading docks, Manufacturing areas, Food processing, Coolers and freezers and Commercial kitchens.

 

Placeholder

Endurabond 450NS

Rapid cure, textured finish epoxy floor coatingwith negligible odour.

Endurabond Floorshield SL

A 100% solids, high-build, self-levelling floor topping recommended for use as an aesthetic epoxy coating where a high degree of resistance to impact, abrasion, and chemical resistance are required.
Provides a seamless, decorative surface. May be applied with a non-skid aggregate finish if required.
Typical areas where this coating is used are:
Hospitals, Canteens, Factories, Laboratories, Schools, Warehouses, Stores, Showrooms, Industrial kitchens and Supermarkets.

Enduragrip C

100% solids, high build, semi-flexible epoxy binder for bonding aggregates to concrete providing excellent vehicular skid resistance and pedestrian slip resistance.
The non-slip aggregate may be sealed with Enduragrip Epoxy Sealer.

Enduragrip PU

100% solids, high build, semi-flexible polyurethane binder for bonding aggregates to asphalt providing excellant vehicular skid resistance and pedestrian slip resistance

008    NewNthRd (4)

Polycrete MDB

A hard wearing, self-priming, aggregate filled cementitious urethane floor topping with excellent thermal shock resistance. POLY-CRETE MDB is typically installed at a nominal ¼ inch thickness and uses a natural quartz aggregate. Recommended substrates are concrete, mild steel and polymer reinforced screeds. POLY-CRETE MDB can be installed with moisture levels up to 12 lb sf/1000 sf/24 hours and can be applied to 7-14 day old concrete. A topcoat of DUR-A-FLEX epoxy, urethane or methyl methacrylate is applied depending on performance requirements.

POLY-CRETE MDB has a wide service temperature range from -37 to 104°C. POLY-CRETE MDB is hygienic and does not harbor bacteria, possess high chemical resistance and high abrasion resistance. POLY-CRETE MDB is VOC and ADA compliant, meets USDA, FDA and CFIA Standards and gain Leed credit points.Dur-a-Flex5