Polymer Group supply proven pool coatings for concrete and cementitious swimming pools to approved applicators.

Epoxy coatings:

Enduracoat SP – a high-build epoxy mastic, high-solids, mid-gloss, protective coating system for concrete swimming pools. Enduracoat EP Sealer – a deeply penetrating epoxy primer, used over cleaned, properly prepared concrete and cementitious surfaces. Enduracoat SP cures to provide a tough and cleanable swimming pool surface and offers outstanding protection for swimming pools.

Chlorinated Rubber Coatings:

Enduracoat 3630HB – a single pack, fast drying chlorinated rubber with good recoatability and offers outstanding protection for swimming pools.  

Swimming Pool Coatings

ENDURACOAT SP is a high-solids, mid-gloss, high-build epoxy mastic protective coating system for concrete swimming pools. It can be applied by spray, brush or roller over sealed concrete and cementitious surfaces, and is compatible with most existing coatings. The cured film provides a tough and cleanable surface.

• Excellent chemical resistance
• Good flexibility and lower stress upon curing than most epoxy coatings
• Very good abrasion resistance

ENDURACOAT SP offers outstanding protection for swimming pools.

Use Enduracoat EP Sealer – a deeply penetrating epoxy primer, over cleaned, properly prepared concrete and cementitious surfaces to ensure full penetration and optimised adhesion of the ENDURACOAT SP protective swimming pool coating to the substrate.

Contact a Polymer Group technical representative for a full preparation and painting specification.